Tags: marxman, hole marking tool, dragons den, essential diy tool, marxman 1-2

Marxman 1-2

£7.79
  • Product Code: 1-2
  • Availability: Made to Order
As Seen on Dragons Den, the Marxman 1-2 will mark surfaces such as tiles, walls, bricks and metal with a bright green dot, showing where you need your drill holes to be. This hole will show you exactly where you need to drill which allows the perfect alignment for whatever you're fixing to your wall..

As Seen on Dragons Den, the Marxman 1-2 will mark surfaces such as tiles, walls, bricks and metal with a bright green dot, showing where you need your drill holes to be. This hole will show you exactly where you need to drill which allows the perfect alignment for whatever you're fixing to your wall. The marxman 1-2 is will spray from 45mm and above. There are approximately 200 uses per marxman, which will cover numerous of projects. It's the ideal tool for anyone's toolbox. Press it! Mark it! Drill it!

  • A simple solution that is essential for any toolbox. Mark holes from over 45mm quickly and efficiently.
  • As well as being easy to use, the Marxman 1-2 is a very fast method and speeds up the process of marking holes significantly.
  • The Marxman 1-2 creates a clear visible dot on almost any surface. It's easily visible.
  • The dot can be removed from most surfaces.

 

If your kick plate is for your door, you should measure the width of your door and remove 50mm (2 inches). For example, if your door is 500mm, you would require a 495mm kick plate. The standard height of a kick plate is between 150mm and 200mm, however this could be dependant on whether your door has a decorative panel or insert. Please note, this is merely a guideline in accordance to a standard kick plate.

- Budget 430 Grade - Internal usage only

- Standard 304 Grade - Can be used inside or outside

- Premium 316 Grade - Also known as marine grade. Inside or out, costal and high Chlorine areas

Our kick plates come with an option to have either a permanent or temporary rear to the plate. This means that if you need the plate to be temporary then you can easily remove it with no holes left in the door. If your plate is to be permanent then screw holes are ideal for your kick plate.

Our kick plates are manufactured after your order is placed to the size and preference you provide when ordering. Please check the measurements of the kick plate(s) you order are 100% correct before making payment. Once you have received a confirmation e-mail that your order has been placed we cannot accept any cancellation requests.

Your order will be shipped as soon as possible. Please bear in mind that because our kick plates are manufactured after you place your order, there could be a delay. Orders placed before 2pm will be processed the next working day. Orders are often received at the delivery address between 4 - 7 working days after the order is placed. If you have not received your order by then, please contact our customer service team by either e-mailing [email protected] or call us on 01422 251251.

All our kick plates are manufactured in the UK.

Due to our kick plates being tailor made to your chosen size, we are unable to accept returns. It is your responsibility to ensure you order the correct size. Please see below for advice on how to know which size you need to order.

We accept all major credit and debit cards, as well as PayPal and SagePay. If you are unsure, feel free to contact us at [email protected] or call us on 01422 251 251.

Please notify us of any damage within two working days of receipt. We will request an image of any damage to items which we are notified about as these will be passed on to the carrier for further investigation. We will then advise on what action is to be taken.

Despite the fact that Stainless Steel is very resistant to corrosion, in some circumstances it can corrode. In normal atmospheric or water based environments, stainless steel will almost never corrode. However, in aggressive conditions, basic grade stainless steel (Such as Grade 304) may corrode. It is recommended, that in aggressive conditions, you should use Grade 430 Stainless Steel.

If you have a question that is not answered in this FAQ, please feel free to email us at [email protected] or call us on 01422 251 251

Charles Watson values your business and endeavours to make your shopping experience reflective of our values of being friendly, available and reliable, therefore we only use delivery partners who we can rely on.

As our kick plates are made to order, they often take between 7 – 14 working days to arrive at your door. If you place your order before 2:30pm, it will be proccessed on the same day.


Check Your Zone:

• Shipping map is below the table.. Click here to scroll down

Zone A (Mainland UK)

£7.99 ex VAT

Zone B (Scottish Highlands)

£19.99 ex VAT

Zone C (Northern Highlands)

£19.99 ex VAT

Rest of World

Unfortunately, we don’t ship orders out of the UK.


When the kick plates arrive back to us, we ship your order on a 24 hour service via ParcelForce.

Delivery Map Parcel Force Logo

Write a review

Note: HTML is not translated!
    Bad           Good
Cookies help our website work.
By using our website, you agree to our use of cookies. Learn More I Understand